Payment & Shipping Terms:
|Stroke:||50-3000 Mm||Speed:||≤ 1000mm/s|
|Repeatability:||±0.01mm||Output Force:||≤ 500KN|
|Motor Connection Type:||Linear / Parallel / Bare||Internal Anti-rotation:||With/without|
|Screw Lead:||4 , 5 , 8 ,10 , 20 , 40 Mm||Load Connection Type:||Male,female,U-bolt,ball Head Hinge And Customized|
Low Inertness Servo Electric Cylinder,
High Rigidity Servo Electric Cylinder,
500KN Servo Electric Cylinder
50-3000mm Servo Electric Cylinder With Control System / 0-500KN linear actuator factory outlet
1. Compact structure and small dimension.
2. High rigidity, low inertness and fast response.
3. High reliability and long operating life.
4. Energy saving&less noise.
5. Convenient assembly and use,simple maintenance.
6. One years of quality assurance, life - long maintenance service.
Example: TJE075 S100 B R 05 A M C 2 P11 O/C N/P
T:Without(TJE040 always without this function )
TJE065:4, 5, 10, 16,20mm
TJE075:4, 5, 10, 20, 40mm
TJE095:4, 5, 6, 8, 10, 25mm
TJE110:5, 6, 8, 10, 20, 32mm
TJE135:10, 20, 50mm
A—Motor Mounting Type
M—Cylinder Mounting Type
M1:Double side mount
M2:Side turnnion mount
M3:Front flange mount
M4:Rear flange mount
M5:Rear clevis mount
M6:Rear shaft mount
C —Load Connection Type
C4:Ball head hinge
2—Number Of Limit Switches
(Default is normally open NPN switch)
Grating ruler + Force sensor
Force sensor:① 4-20mA
Grating ruler:① TTL 24V
② RS422(5V Difference)
If lacking of the part,it means without either grating ruler or force sensor.
P01:Only with grating ruler TTL(24V)
P10:Only with grating ruler 4-20mA
1) In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2) The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
STEP 1 :Accuracy & environmental condition
Check the basic conditions used in the application
STEP 2: Required space
Check the available space in the application and select the installation options: linear type,parallel type or bare cylinder.
STEP 3: MAX axial force required
Check the axial force to select the servo motor and gearbox(if necessary).
STEP 4: MAX speed
Check the required speed to select the screw lead.
STEP 5: Required stroke
Select the required stroke from a list of standard stroke.If the required stroke is not listed: define the length of the available stroke at a minimum of 10 mm.Note the value of the maximum possible travel of the selected model.
STEP 6: Lateral force
Determine the lateral force of the application.The new series of cylinders are allowed to bear some lateral force.Please communicate with us if you need to bear the lateral force in your application.
STEP 7 :Motor mounting flange
Select the appropriate motor mounting flange, linear or parallel.
STEP 8: The push-rod load form
Selects the electric cylinder push-rod end for load connection.
We also provide customized solutions!
★ Military equipment:radar, missile erector, armored vehicle swing platform, special equipment and other warships and aircraft hatch,opening, seat height adjustment, weapon tracking system,actuator,experimental lifting support, tank artillery high and low direction action adjustment, The push of rocket fuel, the opening of furnace door, etc.
★ Special equipment:industrial automation production line, assembly line, logistics transmission, lifting platform, offset control, valve control, coordinate manipulator, mechanical equipment CT Kama knife, food and medicine industry, CNC machine tools, industry packaging machine, Automotive electronic press, textile equipment winding machine indexing, die position control, clamping, drilling, positioning.
★ Experimental Equipment: Simulation platform, test bed, wave machine, testing equipment etc.
Contact Person: Augustine Qiu