Payment & Shipping Terms:
|Material:||Aluminium||Color:||Standard：navy Blue&silvery,others Can Be Customized|
|Motor Connection Type:||Linear/parallel||Internal Anti-rotation:||With/without|
Warp Knitting Electric Cylinder Actuators,
220V Linear Servo Actuator,
High Speed Servo Electric Cylinder
The is a electric linear actuator motion that converts the rotating motion of the motor into the push rod through the rotating motion of the screw and the screw pair. By using the closed-loop control characteristic of servo motor, the precision control of thrust, speed and position can be realized conveniently, and the program can be realized by using modern motion control technology, numerical control technology and bus (network) technology. Because of its control and convenience, it can realize the precision motion control that cylinder and hydraulic cylinder drive can not realize.
TJE series electric cylinders adopt advanced modular design, with the feature of :
★ Compact structure and small dimension
★ High performance, low inertness, low noise ,high response
★ High reliability and long operating life
★ Application technology of both ball screws and roller screws
★ Convenient assembly and use, energy saving,simple maintenance
★ Special installation,preservation,dust prevention, dampproof
★ High&low temperature environment
★ Waterproof at sea, anti-explosion work
★ Linear displacement sensor
★ Pressure sensor
★ Resistance swing mechanism
★ Planetary gearbox
★ Motor: AC servo motor, DC brushless motor, stepping motor,DC motor,AC frequency conversion motor, etc.
Example: TJE075 S100 B R 05 A M C 2 P11 O/C N/P
T:Without(TJE040 always without this function )
TJE065:4, 5, 10, 16,20mm
TJE075:4, 5, 10, 20, 40mm
TJE095:4, 5, 6, 8, 10, 25mm
TJE110:5, 6, 8, 10, 20, 32mm
TJE135:10, 20, 50mm
A—Motor Mounting Type
M—Cylinder Mounting Type
M1:Double side mount
M2:Side turnnion mount
M3:Front flange mount
M4:Rear flange mount
M5:Rear clevis mount
M6:Rear shaft mount
C —Load Connection Type
C4:Ball head hinge
2—Number Of Limit Switches
(Default is normally open NPN switch)
|Grating ruler + Force sensor|
Force sensor:① 4-20mA
Grating ruler:① TTL 24V
② RS422(5V Difference)
If lacking of the part,it means without either grating ruler or force sensor.
P01:Only with grating ruler TTL(24V)
P10:Only with grating ruler 4-20mA
1)In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2)The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
(1) The relationship between the motor output torque and the output force of the electric cylinder:
★ F: electric cylinder output force, Unit: Kn
★ T: motor output torque, Unit: Nm
★ R: Reduction ratio
★ L: Screw lead,Unit: mm
★ η: efficiency (generally the total efficiency is 85%, but the actual efficiency will chage,it is based on the actual use conditions)
(2) The calculation of the average load
Average load means:A cube average value be calculated according to the force,speed,time in different working areas during a working cycle.
The average load of the electric cylinder is calculated as follows:
|1- HNC/CRHNC Foot mounting part||When the motor is mounted parall,this part is used for installing bearings and reducer end caps.|
|2- FNC/CRFNG Flange mounting part||When the motor is mounted parall,this part is used for installing bearings and reducer end caps.|
|3- ZNCF/CRZNG Trunnion mounting part||When the motor is mounted parall,this part is used for installing bearings and reducer end caps.|
|4- LNZG/CRLNZG Trunnion bearing||For trunnion mounted on the cylinder block.|
|5- SNC Double clevis bearing||For the motor mounted parallel.|
|6- LSNG Spherical hinge clevis bearing||For the motor mounted parallel,with spherical bearing.|
|7- LSNSG Spherical hinge clevis bearing||For the motor mounted parallel,with spherical bearing, welding synthesis.|
|8- SNCS Double clevis mounting part||For the motor mounted parallel,with spherical bearing.|
|9- LBG Double clevis bearing||For the motor mounted parallel,with spherical bearing.|
|aJ- Double clevis mounting part||For the motor mounted parallel.|
|aA- Double clevis mounting part||For the motor mounted parallel,with spherical bearing.|
|aB- Double clevis mounting part||For the motor mounted parallel.|
|aC- Clevis bearing||For the motor mounted parallel.|
|aD- Spherical hinge Clevis bearing||For the motor mounted parallel,with spherical bearing.|
|aE- Trunnion bearing||For being mounted to any position of the cylinder.If the motor is mounted parallel,the mounting position couldn’t near the motor.|
|aF- Foot mounting part||For the motor mounted axially.|
|aG- Joint bearing||With spherical bearing.|
|aH- Connecting flange||For compensating radial deviation.|
|aI- Double clevis||For the cylinder swing in a plane.|
|bJ- Self in connection part||For compensating radial and angular deviations.|
|bA- Right angle spherical hinge clevis bearing||For joint bearing.|
|bB- Double clevis||For the cylinder swing installation.|
|bC- Guiding unit||Prevent cylinder from twisting under high torque|
|bD- Proximity Switches||For testing the position, can be integrated in the sensor mounting slot.|
|bE- Slot cover||For preventing dust from entering.|
|bF- Parallel installation components||For the motor mounted parallel.|
|bG- Axial installation components||For the motor mounted axially.|
|Items||Electric cylinder||Hydraulic cylinder||Pneumatic Cylinders|
|Environmental||Oil leak||High noise|
|Safety||Safe||Oil leak||Gas leak|
|Energy loss||Low loss||High loss||High loss|
|Lifetime||Very Long||Can be long with proper maintenance||Can be long with proper maintenance|
|Maintenance||Almost maintenance free||Frequent & high cost||Regular & high cost|
|Shock resistance ability||
|Location precision||Very high||Medium||Medium|
★ Military equipment:radar, missile erector, armored vehicle swing platform, special equipment and other warships and aircraft hatch,opening, seat height adjustment, weapon tracking system,actuator,experimental lifting support, tank artillery high and low direction action adjustment, The push of rocket fuel, the opening of furnace door, etc.
★ Special equipment:industrial automation production line, assembly line, logistics transmission, lifting platform, offset control, valve control, coordinate manipulator, mechanical equipment CT Kama knife, food and medicine industry, CNC machine tools, industry packaging machine, Automotive electronic press, textile equipment winding machine indexing, die position control, clamping, drilling, positioning.
★ Experimental Equipment: Simulation platform, test bed, wave machine, testing equipment etc.
This type is especially suitable for :warp knitting machine, fast speed and quick response
★ Electric cylinder is refueled with lubricating grease GB7324-1994 general lithium base 3 lubricating grease when leaves factory.
★ After electric cylinder has run for 300 hours, refill the lubricating grease. Refueling frequency, per 2000hours one time as usual, it is determined on basis of the operating environment and day-to-day operational time.
★ Refueling method: open the filler hole on the shell of electric cylinder, turn the screw to find the filler hole on the screw nut and refuel lubricating grease.
★ Requirement for lubricating grease:GB7324-1994 general lithium base 3 lubricating grease.